0086-571-88220653 hzpt@hzpt.com
0 आयटम
पृष्ठ निवडा

R/F/K/S गिअरबॉक्सेस

कामगिरी वैशिष्ट्ये

  1.  Serialized and modular design is adopted, with wide transmission ratio coverage and fine grading;
  2. High transmission efficiency, low energy consumption and superior performance;
  3. The gear is grinded by high-precision gear grinding machine, with stable transmission, low noise, large पत्करणे capacity and long service life;
  4. Exquisite design: small size, simple installation and wide use
  5. Various installation methods, suitable for omnidirectional universal installation configuration;
  6. The combined combination of GS series and GRF series reducers can be realized, which is suitable for special low-speed applications.

मुख्य साहित्य

Box: HT250 high-strength cast iron. Injection cavity, effectively reduce the wear of parts;
Gear: 20CrMo high-quality alloy steel, carbonitriding treatment (keep the tooth surface hardness HRC60 after fine grinding)
Flat key: 45 steel, surface hardness HRC50

Reducer efficiency

1. Because high-precision गियर, oil seals and bearings are used to effectively reduce friction, the interstage efficiency of gear transmission can reach 97%;
2. In some installation methods, the input stage gear is completely immersed in lubricating oil. For large engine seat number and high input speed, oil mixing loss must be considered.

Service conditions

1. The ambient temperature is – 40~50 ℃ (the lubricating oil shall be heated to above o ℃ or antifreeze lubricating oil shall be used when starting under 0 ℃)
2. Input speed is not more than 2800 rpm
3. It can be used for forward and reverse rotation;
4. No industry restrictions;

Input power and allowable torque

आर मालिका कोएक्सियल हेलिकल गियरबॉक्स

r-series-gearboxtorque

S मालिका हेलिकल-वॉर्म गियर मोटर

s-series-gearbox torque

के मालिका हेलिकल-बेव्हल गिअरबॉक्स

k-series-gearbox torque

F मालिका हेलिकल-बेव्हल गियर मोटर

f-series-gearbox torque

आर सीरीज हेलिकल गियर मोटर

Basic versions

RX…
Single-stage foot-mounted helical geared unit

RXF…
Single-stage Flange-mounted helical geared unit

आर…
Foot-mounted helical geared unit

आरएफ…
Flange-mounted helical geared unit

R…F
Foot and Flange-mounted helical geared unit

RZ…
B14 Flange-mounted helical geared unit
Input versions

R.. Y..
Input with geared motors

R.. AM..
Input with AM adapters for mounting IEC motors

R.. AD..
Input with AD shaft assembly
R… and RF… Combination

If special low speed is needed, RF… gearbox can be the input of R…gearbox

F Series Helical-bevel Geared Motor

Basic versions

F…
Foot-mounted parallel shaft helical geared unit

 

 

 

 

 

 


FA…B
Foot-mounted parallel shaft helical geared unit
FV…B
Foot-mounted parallel shaft helical geared unit with splined hollow shaft to DIN5480

 

 

 


FA…
Parallel shaft helical geared units with hollow shaft
FV…
Parallel shaft helical geared unit with splined hollow shaft to DIN5480

 

 

 


FAF…
Parallel shaft helical geared unit in B5 flange mounted version with hollow shaft
FVF…
Parallel shaft helical geared unit in B5 flange-mounted version with spline hollow shaft to DIN5480

 


FAZ…
Parallel shaft helical geared unit in B14 flange mounted version with hollow shaft
FVZ…
Parallel shaft helical geared unit in B14 flange mounted version with splined hollow shaft to DIN5480


FF…
Parallel shaft helical geared unit in B5 flange-mounted version

 


FH…B
Foot-mounted parallel shaft helical geared unit with hollow shaft and shrink disk

 


FH…
Parallel shaft helical geared units with hollow shaft and shrink disk

 


FHF..
Parallel shaft helical geared units in B5 flange-mounted version with hollow shaft and shrink disk

FHZ..
Parallel shaft helical geared units in B14 flange-mounted version with hollow shaft and shrink disk
Input versions
 
F.. Y..
Input with geared motors

F.. AM..
Input with AM adapters for mounting IEC motors

F.. AD..
Input with AD shaft assembly
F… and RF… Combination

If special low speed is needed, RF… gearbox can be the input of F…gearbox

के मालिका हेलिकल-बेव्हल गियर मोटर

Basic versions

K…
Foot-mounted helical-Bevel geared unit

 

 

 

 

KA…B
Foot-mounted helical-bevel geared unit with hollow pin
KV…B
Foot-mounted helical-bevel geared unit with splined hollow shaft & hollow shaft to DIN5480

KH…B
Foot-mounted helical-bevel geared unit with  hollow shaft and shrink disc

 

 

 

 

KF…
Helical-bevel geared unit in B5 flange-mounted version

 

 

 

 

 

KAF…
Helical-bevel gear unit in B5 flange  with hollow shaft
KVF…
Helical-bevel geared unit in B5 flange mounted version with hollow shaft & splined hollow shaft to DIN5480

KHF…
Helical-bevel geared unit in B5 flange mounted version with hollow shaft & shrink disc

 

 

 

 

 

KA
Helical-bevel geared unit with hollow shaft
KV
Helical-bevel geared unit with hollow shaft to DIN5480

 

 

 

 

 

KH…
Parallel shaft helical geared units with hollow shaft and shrink disk
KT
Helical-bevel geared unit with hollow shaft and torque arm

 

 

 

 

KAZ..
Helical-bevel geared unit in B14 flange mounted version with hollow shaft
KVZ…
Helical-bevel geared unit in B14 flange mounted version with hollow shaft & splined hollow shaft to DIN5480

KHZ..
Helical-bevel geared unit in B14 flange mounted version with hollow shaft & shrink disc

 

 

 

 

Input versions
K.. Y..
Input with geared motors
K.. AM..
Input with AM adapters for mounting IEC motors
K.. AD..
Input with AD shaft assembly
K… and RK… Combination

If special low speed is needed, K… gearbox can be the input of RF…gearbox

S Series Helical-worm Geared Motor

Basic versions

एस…
Foot-mounted helical-worm geared units

SA…
Helical-worm geared unit with hollow shaft
SAF…
Helical-worm geared units in B5 flange-mounted version with hollow shaft
SAZ…
Helical-worm geared unit in B14 flange-mounted version in hollow shaft
SF…
Helical-worm geared units in B5 flange mounted version
SH
Helical-worm geared units with hollow shaft and shrink disk
SHF…
Helical-worm geared units in B5 flange mounted version and shrink disk
SHZ
Helical-worm geared units in B14 flange mounted version with hollow shaft and shrink disk
Input versions

S.. Y..
Input with geared motors

S.. AM..
Input with AM adapters for mounting IEC motors

S.. AD..
Input with AD shaft assembly
S… and RS… Combination

If special low speed is needed, S… gearbox can be the input of RS…gearbox

1 परिणामांपैकी 12-18 दर्शवित आहे